Would you ever consider finishing this beauty off? Since development is currently dead in the water, and so close to the finish line too! https://www.racedepartment.com/threads/toyota-7-578a.176059/
Not sure I could do it justice, being modeled by a pro. Also getting my hands on the model may prove difficult and also cause a shitstorm because of my views on IP.
Guy behind the 7 here, while I personally have not had the time to work on the car myself, I have handed the project files off to another individual who wants to learn to mod. I did not make a post on the thread as the individual does not want to be revealed just yet, but I will be overseeing development just to make sure that things are still held up to the high standard I would like to keep it at. Unfortunately I do not have any timeline for the car to provide, but hope this helps.
I too am hoping you follow through on that Ti-22!! One of my all time favorite race cars. I have tons of photos close up of the actual car if that would help!
Not usually, CM can generate an AO and wireframe so I use those. Important NOT to burn the AO into any skin textures as the Material already has one. i.e. I use the AO as a guide but do not save it to the final skin file.
The 956, as in a lot of Forza models, hasn't the best mapping but I keep it so I can migrate it to all the LODs easily.
Encryption's made by greedy creators that only value their money than their contributions to the community, especially those Patreons.
While there are some Patreons who do not encrypt their mods, others they're just downright scummy, crying about someone giving out their crap for free which is what they deserve especially if they use GT/Forza models.
Conversions only I'm afraid. The Ferrari 500, that's causing such a stink, is actually too High poly/Low detail for me to have considered putting into AC. However there where other pressing reasons for me to do my own versions.
Good morning, a question, how could I get the DATSUN 280ZX IMSA?... I ask because I put together a mod (mixing several mods) of an Argentine category from 1982, in which the Datsun 280zx ran, they were with standard preparation, But they changed the horn, and that horn that the Datsun 280 from IMSA has, I think it would fit me very well, adapted to the mod that I edited. Thank you and sorry for the inconvenience.
This is the mod that I edited for my use, I don't know how to model 3D, it is not high level, but I managed to do what I was looking for. https://drive.google.com/file/d/1-ZTT27E_4MxGeRlf1ixwh_vc3GQJN8Mh/view?usp=sharing
The model comes from Forza, which you can 3DSimEd to convert. But here is the model in .kn5 form which you may find useful. https://drive.google.com/file/d/16CRTzop_18KQWTpH26VbhX37hZGRCMZq/view?usp=drive_link
Good morning!!! Thank you very much for giving me the Datsun, I already used the horn for the mod that I was editing, according to my possibilities, I don't understand 3D modeling, but well, more or less what I had in mind turned out. Here I leave you the link of the result, a Datsin 280ZX CAP Argentino, with a modernized horn. And, once again, thank you very much!!!! https://drive.google.com/file/d/1TZzxR6pqRuUm6Kja_FyeXObrsn8Tgj7x/view?usp=sharing
LOLA T163
AUTOCOAST TI22
Escudo '96
Escudo '06
Would you ever consider finishing this beauty off? Since development is currently dead in the water, and so close to the finish line too! https://www.racedepartment.com/threads/toyota-7-578a.176059/
ReplyDeleteNot sure I could do it justice, being modeled by a pro. Also getting my hands on the model may prove difficult and also cause a shitstorm because of my views on IP.
DeleteGuy behind the 7 here, while I personally have not had the time to work on the car myself, I have handed the project files off to another individual who wants to learn to mod. I did not make a post on the thread as the individual does not want to be revealed just yet, but I will be overseeing development just to make sure that things are still held up to the high standard I would like to keep it at. Unfortunately I do not have any timeline for the car to provide, but hope this helps.
DeleteI too am hoping you follow through on that Ti-22!! One of my all time favorite race cars. I have tons of photos close up of the actual car if that would help!
ReplyDeleteNot interested in photos?
DeleteOverlooked that, yes anything you can email to me will help. Cheers
Deleteyou should consider making a full 2000 f1 grid
ReplyDeleteNot likely.
DeleteWill you plan to release skin templates for all your cars?
ReplyDeleteNot usually, CM can generate an AO and wireframe so I use those.
DeleteImportant NOT to burn the AO into any skin textures as the Material already has one.
i.e. I use the AO as a guide but do not save it to the final skin file.
The 956, as in a lot of Forza models, hasn't the best mapping but I keep it so I can migrate it to all the LODs easily.
It is my Blog, why shouldn't I delete comments?
ReplyDeleteAgreed. Encryption is a cancer that kills AC.
ReplyDeleteHang on I thought I was the Cancer!
DeleteMaybe I'm a benign growth that only needs to be excised for the sake of Vanity.
I have replaced all encrypted Bazza models with unencrypted derivatives that are available. Would love to do the same with the Maserati...
ReplyDeleteEncryption's made by greedy creators that only value their money than their contributions to the community, especially those Patreons.
ReplyDeleteWhile there are some Patreons who do not encrypt their mods, others they're just downright scummy, crying about someone giving out their crap for free which is what they deserve especially if they use GT/Forza models.
Hope that somebody would do a certain VS' work of creating other trims of existing cars for free, for everyone in the future.
ReplyDeleteThat's the Maserati from '63 ? Gorgeous back !
ReplyDelete64...
ReplyDeletePlease please the Ferrari bread van 😎
ReplyDeleteConversions only I'm afraid. The Ferrari 500, that's causing such a stink, is actually too High poly/Low detail for me to have considered putting into AC. However there where other pressing reasons for me to do my own versions.
DeleteEzatos, I'm glad you came back, so now I can tell you to Fuck Off!
ReplyDeleteGood morning, a question, how could I get the DATSUN 280ZX IMSA?... I ask because I put together a mod (mixing several mods) of an Argentine category from 1982, in which the Datsun 280zx ran, they were with standard preparation, But they changed the horn, and that horn that the Datsun 280 from IMSA has, I think it would fit me very well, adapted to the mod that I edited.
ReplyDeleteThank you and sorry for the inconvenience.
This is the mod that I edited for my use, I don't know how to model 3D, it is not high level, but I managed to do what I was looking for.
Deletehttps://drive.google.com/file/d/1-ZTT27E_4MxGeRlf1ixwh_vc3GQJN8Mh/view?usp=sharing
The model comes from Forza, which you can 3DSimEd to convert.
DeleteBut here is the model in .kn5 form which you may find useful.
https://drive.google.com/file/d/16CRTzop_18KQWTpH26VbhX37hZGRCMZq/view?usp=drive_link
Good morning!!! Thank you very much for giving me the Datsun, I already used the horn for the mod that I was editing, according to my possibilities, I don't understand 3D modeling, but well, more or less what I had in mind turned out.
DeleteHere I leave you the link of the result, a Datsin 280ZX CAP Argentino, with a modernized horn.
And, once again, thank you very much!!!!
https://drive.google.com/file/d/1TZzxR6pqRuUm6Kja_FyeXObrsn8Tgj7x/view?usp=sharing
'Horn' = el claxon
ReplyDelete